产品中心
TH830/TH837/TH837D
性能概述 DESCRIPTION
安装于液压系统的低压管路或回油管路中。
工作压力：最高压力28bar
工作温度：-29℃~120℃
发讯器发讯压差：0.3MPa
旁通阀开启压差：0.5MPa
壳体材料：铝合金
工作介质：矿物油、乳化液、水-乙二醇、磷酸酯液压液
It is installed in low-pressure or return pipelinese of hydraulic system.
Operating pressure: Max. 28bar
Operating temperature: -29℃~120℃
Setting pressure of clogging indicator:0.3Mpa
Bypass valve cracking pressure: 0.5Mpa
Filter housing material:Aluminium alloy
Working substance: mineral oil, emulsion, water-glycol, phosphate ester hydraulic oil（resin-impregnated paper only for mineral oil).
系列型谱 ORDERING INFORMATION
压降流量曲线 PRESSURE DROP CURVES CHARACTERISTICS
(介质参数KINEMATIC VISCOSITY :30㎜²/s DENDITY 0.86㎏/dm³）
图示尺寸 DIMENSIONS
SFW系列吸油过滤器安装在油泵进口处或者油箱内部，可以清洗和重复使用。
工作温度：-25℃~120℃
过滤材料：不锈钢编织网
工作介质：矿物油、乳化液、水-乙二醇、磷酸酯液压液
SFW Series suction filter element for mounting on pumps or inside tanks.They are cleanable and reusable.
Operating temperature: -25℃~120℃
Filtration material: stainless steel wire mesh
Working substance: mineral oil, emulsion, water-glycol, phosphate ester hydraulic oil
所属分类：
关键词：
TH830/TH837/TH837D
性能概述 DESCRIPTION
安装于液压系统的低压管路或回油管路中。
工作压力：最高压力28bar
工作温度：-29℃~120℃
发讯器发讯压差：0.3MPa
旁通阀开启压差：0.5MPa
壳体材料：铝合金
工作介质：矿物油、乳化液、水-乙二醇、磷酸酯液压液
It is installed in low-pressure or return pipelinese of hydraulic system.
Operating pressure: Max. 28bar
Operating temperature: -29℃~120℃
Setting pressure of clogging indicator:0.3Mpa
Bypass valve cracking pressure: 0.5Mpa
Filter housing material:Aluminium alloy
Working substance: mineral oil, emulsion, water-glycol, phosphate ester hydraulic oil（resin-impregnated paper only for mineral oil).
系列型谱 ORDERING INFORMATION
压降流量曲线 PRESSURE DROP CURVES CHARACTERISTICS
(介质参数KINEMATIC VISCOSITY :30㎜²/s DENDITY 0.86㎏/dm³）
图示尺寸 DIMENSIONS
性能概述 DESCRIPTION
SFW系列吸油过滤器安装在油泵进口处或者油箱内部，可以清洗和重复使用。
工作温度：-25℃~120℃
过滤材料：不锈钢编织网
工作介质：矿物油、乳化液、水-乙二醇、磷酸酯液压液
SFW Series suction filter element for mounting on pumps or inside tanks.They are cleanable and reusable.
Operating temperature: -25℃~120℃
Filtration material: stainless steel wire mesh
Working substance: mineral oil, emulsion, water-glycol, phosphate ester hydraulic oil
