产品中心
PSD系列
性能概述 DESCRIPTION
PSD系列吸油过滤器可安装在油箱顶面、底面或侧面，吸油口需安装在油箱液面以下。更换滤芯时，自封止回阀工作，可防止油箱油液外流。在清洗滤芯的时候自封止回阀会工作防止油液外流。
工作压力：最高压力1.6MPa
工作温度：-25℃~120℃
发讯器发讯压力：-0.03MPa
壳体材料：铸铝
工作介质：矿物油、乳化液、水-乙二醇、磷酸酯液压液
The PSD suction filter can be mounted on the top,at the bottom or at the side of the tank,and the inlet port should be fixed below the fluid level.The check valve will close automatically to prevent oil flowing out from the tank when the element is taken out for washing.
Operating pressure: Max. 16 bar
Operating temperature: -25℃~120℃
Setting pressure of indicator: -0.3bar
Filter housing material:aluminium
Working substance: mineral oil, emulsion, water-glycol, phosphate ester hydraulic oil（resin-impregnated paper only for mineral oil).
系列型谱 ORDERING INFORMATION
图示尺寸 DIMENSIONS
SFW系列吸油过滤器安装在油泵进口处或者油箱内部，可以清洗和重复使用。
工作温度：-25℃~120℃
过滤材料：不锈钢编织网
工作介质：矿物油、乳化液、水-乙二醇、磷酸酯液压液
SFW Series suction filter element for mounting on pumps or inside tanks.They are cleanable and reusable.
Operating temperature: -25℃~120℃
Filtration material: stainless steel wire mesh
Working substance: mineral oil, emulsion, water-glycol, phosphate ester hydraulic oil
所属分类：
关键词：
PSD系列
性能概述 DESCRIPTION
PSD系列吸油过滤器可安装在油箱顶面、底面或侧面，吸油口需安装在油箱液面以下。更换滤芯时，自封止回阀工作，可防止油箱油液外流。在清洗滤芯的时候自封止回阀会工作防止油液外流。
工作压力：最高压力1.6MPa
工作温度：-25℃~120℃
发讯器发讯压力：-0.03MPa
壳体材料：铸铝
工作介质：矿物油、乳化液、水-乙二醇、磷酸酯液压液
The PSD suction filter can be mounted on the top,at the bottom or at the side of the tank,and the inlet port should be fixed below the fluid level.The check valve will close automatically to prevent oil flowing out from the tank when the element is taken out for washing.
Operating pressure: Max. 16 bar
Operating temperature: -25℃~120℃
Setting pressure of indicator: -0.3bar
Filter housing material:aluminium
Working substance: mineral oil, emulsion, water-glycol, phosphate ester hydraulic oil（resin-impregnated paper only for mineral oil).
系列型谱 ORDERING INFORMATION
图示尺寸 DIMENSIONS
性能概述 DESCRIPTION
SFW系列吸油过滤器安装在油泵进口处或者油箱内部，可以清洗和重复使用。
工作温度：-25℃~120℃
过滤材料：不锈钢编织网
工作介质：矿物油、乳化液、水-乙二醇、磷酸酯液压液
SFW Series suction filter element for mounting on pumps or inside tanks.They are cleanable and reusable.
Operating temperature: -25℃~120℃
Filtration material: stainless steel wire mesh
Working substance: mineral oil, emulsion, water-glycol, phosphate ester hydraulic oil
